Melting Furnaces

We have installed Inductotherm make 250 KW Induction Furnace with Crucible capacity 300 kgs and 500 kgs.

Automatic Sand Plant

We have installed latest Shree Shakti make Green Sand plant to meet the demand of Green Sand for the Molding Machines. It is equipped with an intensive mixer of 250 Kgs. capacity. The addition of Moister, Coal Dust, Bentonite will be through the PLC control to achieve the consistency in quality of the prepared green sand to ensure the production of the castings free from blow holes, pin holes etc.

Moulding Machine

We have installed a pair of ARPA 300 SJS molding machine which can accommodate box size of 20” x 22” x 5”. The capacity of the molding machine is to produce 40 Moulds/ Hr. The production of mold boxes is around 960 Nos. / Day. We have made  the provision to install a pair  of  ARPA 450 machine with the box size of  26” x  32 ” it will be installed at the time to meet the increased demand of the castings.

Hand Moulding

We shall be producing Hand Molded castings of different varieties and applications meeting the needs of Plastic Molding Machines, Valves, Refrigeration, Compressors, Turbochargers, Marine, Wind Mills, and Railways etc. Keeping in view the present furnace capacity we will be able to produce castings in the weight range of 350 Kgs. / Pc. In Grey Iron and in S.G. Iron up to 325 Kgs. /Pc. in all grades.

Shot Blasting, Fettling and Finishing

We are getting our castings shot blasted through the sub contractor located very near to our foundry. We shall be installing 48”dia. table type shot blasting machine in very near future. We have also put up Cutting Machine; 16”Heavy Swing Frame Grinder, Heavy Pedestal Bench Grinders, Flexible Grinders, and Pencil Grinders etc. are installed to meet the excellent surface finishing requirements of the castings.

Material Handling

For treatment of S.G.Iron, we have installed over head Electric Cranes of 5MT. Also 1 MT Hoist is installed at Knock Out to remove castings from the poured mold boxes. Two nos. hoists of Capacity 1.0 MT each are installed at molding machines for lifting and closing of mold boxes.